JP-1300A自動輸送剪切拼接機
性能特點Characteristics
●JP-1300A該機具有工作穩定,、壓合力大,、熱膠合時間短且自控設定溫度，前芯板自動定位在加熱板中間,，等待后芯板對接,，可任意選擇拼接寬度。該機采用可編程控制器與人機界面觸摸屏,，旋轉編碼器,、光電開關、接近開關等輸入元件,，通過編制程序,，可實現設定所需的芯板長度拼接到達后自動剪切,、自動輸送、輸送后尾板自動定位在加熱板中間,，自動化程度高,，可實現一鍵操作。
該機還具有將剪切后的芯板自動送入?yún)О逖b置上,，節省人工,。
●該機與SD-40C型斜磨機配套使用，能充分滿足廣大用戶將芯板斜磨,、自動對接,、熱壓拼接、任意定長剪切組合成流水線的迫切需求,。熱壓膠合板時間僅為同類熱壓拼接機三分之一,，并節省人工、成倍地提高生產率,。該機是我公司開發研制的生產較高強度,、較高質量膠合板的優良新型設備，是膠合板生產商的選擇,。
●The machine has charecteristics such as stable powerful short time press time and temperature auto-control,front core board auto-position rear core board auto-joint,exact conglutinating auto-controlling width counter auto-controlling set cutting length or manual controlling cutting length etc...so that it can satisfy the customer to line the bevelling,gum,auto-joint press and cut-to-length,pressing time is ony one third of similar thermocompression(hotpress)jointer,so it can save labor cost and multiply production efficiency,there the machine is first choice in producing high quaity plywood.
主要技術參數Technical specifications
壓合寬度 Pressing Width ≤ 40mm
剪切寬度 Cutting Width ≤ 1350mm
工作壓力 Air Pressure ≤ 0.8Mpa
加熱功率 Heating Power 7KW
電機功率 Motor Power 0.55KW
剪切電機功率 Cutting Motor Power 1.5KW
外形尺寸 Overall Dimension(L x W x H) 1850 x 1180 x 1850mm
設備重量 Equipment Net Mass 800Kg
●控制面板設計美觀,、功能多，觸摸屏顯示直觀,，參數設置方便,。
●PLC編程控制器，編程自動化程度高,，旋轉編碼器技術準確,。
●光電開關與PLC編程配合，可任意選擇拼口的寬度和準確位置,。
●計米長度可手動復位,，剪切功能可自動，也可手動操作,。
●根據編程設置自動輸送芯板,，也可手動操作芯板進退。
●Controlling panel designed artistically,multifunction,intuitionistic,and easy operated.
●Cooperation of rotary coder with counter can precisely measure the length of arbitrary chosen boards and cut automatically.
●Cooperation of optoelectronic switch and timing relay can choose width and position of jointing seam.
●Controlling pressing panel is liftingable and displayed,so that is convenient for adjusting and seting.
●Counter is manual repositioned,cutting can be realized manually.
Repressing,and core board can enter or quit.
